Diamond set of nanocosmetis for car
Diamond set of nanocosmetis for car
Have Pikatec applied by a professional in our application centres.The closest one is from you at the address:
Unique nanotechnological cosmetics that create an invisible transparent layer of nanoparticles (a millionth of a metre) on the car’s lacquer or glass have a width of only several nanometres. The nanoparticles contained in the cosmetics are invisible to the human eye because their size is several times smaller than the wavelength of visible light. We use this feature, for example, in transparent auto cosmetics which contain nanoparticles of silicone oxide or zircon oxide, which do not change the colour but give the surface the required hardness and resistance to scratching. They penetrate the pores and microscopic cracks in lacquer and so protect lacquer from further scratching. Other chemical components highlight the sheen and depth of lacquer.
The principle of PIKATEC DIAMOND nanocosmetics
The newest, the best and uncompromising – this is a new series of PIKATEC nanocosmetics. The assignment was clear – we want autocosmetics that can withstand cold arctic as well as hot equatorial extremes. We want maximum UV protection for lacquers! We want maximum hardness and abrasion resistance! We want maximum water resistance!
We want to seal pores in lacquer as much as possible for a period of one year. We want the shortest time possible for hardening and maximum resistance to industrial detergents. We want maximum thermal resistance. Simply put – we want to create the best and most resistant autocosmetics imaginable and, along the way, leave the production price to one side - this aspect will be addressed later, if necessary.
The PIKATEC DIAMOND series has been specially developed and produced from self-supporting emulsion and nanoparticles with a size of up to 30 nm (nm – a nanometre – one billionth of a metre), which are permanently dissolved in the liquid environment of the new generation cosmetic emulsion thanks to a special solvent. These solid particles contain silicon oxide, titanium oxide and zircon oxide. Together they improve the repelling properties in relation to liquids and resistance to mechanical surface wear and tear. Other unique components of PIKATEC DIAMOND autocosmetics provide a protective shield against other impurities, chemicals and salts. Moreover, the cosmetics provide the treated surface with a perfect UV filter and so prevent the aging of lacquer. The polish can withstand temperatures of over 700°C. This is the definition of the new PIKATEC DIAMOND autocosmetics.
Diamond Nano Shampoo – impurity remover, shampoo (150 ml)
A new formula of nano-preparation that highlights lacquer. In the first phase it is used to clean and remove impurities before Diamond Nano Armour (nano-polish for car bodywork) is applied. In the second phase it is used to maintain the surface of the bodywork after Diamond Nano Armour has been applied and to prolong the service life of this polish. After the polish has been applied try to avoid the use of industrial detergents on the car if possible. (They often destroy all protective polishes and surfaces, including wax.) However, the new formula has also significantly improved the resistance to these detergents. A treated surface of the bodywork exposed to washing (20 times) with a very strong detergent solution has lost only 7 % of its hydrophobic properties. (Test with detergent: 50 ml of detergent in 2 litres of water – each time washing an identical spot on the bodywork for one minute).
Nanoparticles (billionths of a metre) easily penetrate pores on the surface and remove stains caused by oil and insects. This preparation is optimised for manually washing car, ship and motorcycle bodywork. It is harmless to the environment.
Diamond Nano Armour –paintwork polish (50 ml)
The revolutionary new, uncompromising and ultimate formula of nanotechnological preparation that creates an invisible transparent layer of nanoparticles (billionths of a metre). A hard protective shield is created in this way. The polish penetrates pores and microscopic cracks in lacquer and protects it from further damage. It levels the surface and reduces its aerodynamic resistance. As a result flying objects easily rebound from the layer of nanoparticles and do not create scratches and grooves. The same applies to insects that come into contact with the bodywork. The effect of the preparation lasts for a long time – 12 months. It will provide a high sheen protection from scratches caused by small pebbles and dirt, protection from the influence of salt and bitumen, protection from pollen and resin from trees, protection from bird excrement and particularly from UV radiation. The polish should be applied exclusively on surfaces pre-washed with Diamond Nano Shampoo. The new formula is significantly resistant even to detergents. A surface exposed to washing (20 times) with a very strong detergent solution has lost only 7 % of its hydrophobic properties. (Test with detergent: 50 ml of detergent in 2 litres of water – each time washing an identical spot for one minute). Diamond Nano Armour is developed to withstand extreme temperatures of up to 700°C.
Diamond Nano Clear Glass – impurity remover for glass (40 ml)
A preparation used to remove impurities before Diamond Nano Protect Glass (nano protection of glass) is applied. Nanoparticles (billionths of a metre) easily enter the pores and remove the impurities settled in the structure of glass.
Diamond Nano Protect Glass – polish for glass (40 ml)
A revolutionary new, uncompromising and ultimate formula of nanotechnological hydrophobic preparation. It serves as protection against impurities and water. It has a long-term effect of up to one year. The nanoparticles (billionths of a metre) create an invisible transparent layer on the surface of glass, a hard protective shield of a kind, which penetrates the pores of glass, smooths the surface and reduces its aerodynamic resistance. As a result flying objects lightly rebound from the surface and do not create long scratches and grooves in the glass. Protection against insects that come into contact with the bodywork functions similarly. No (or hardly any) long smudges obstructing the driver’s view are created on the glass. The hydrophobic preparation works on the principle of a lotus effect whereby droplets of water glide down along the surface thanks to gravitational pull or air flow. These drops of liquid, rolling along the surface of the glass, remove particles of dirt that have stuck to the glass. When it rains, a self-cleaning effect takes place and it is not necessary to use windscreen wipers from speeds of about 60 km/h (according to the incline of the glass). However, you should always ensure that your driving is safe!
Diamond Nano Protect Wheel – polish for wheels (30 ml)
A new uncompromising nanotechnological preparation formula designed for the protection of aluminium, chrome-plated and lacquered wheels. It is very resistant to high temperatures. It covers the surface with an invisible (transparent) layer, which is very hard and protects the wheel from abrasive particles. It smooths the rough surface of the wheel, which means less dirt will stick, particularly dirt from brake pads. Because the impurities are not let onto the wheel’s surface, the wheel is not only protected – the dirt also cannot penetrate deep into the wheel’s structure. Removing this engrained dirt is very laborious and often almost impossible. This preparation can withstand temperatures of over 700° C. Its effect is long-lasting; the preparation provides a high sheen, protection from scratches caused by small pebbles and dust, protection from the effects of salts and bitumen, protection from pollen and resin from trees, protection from bird excrement and also protection form UV radiation. We recommend that the polish be applied exclusively to surfaces pre-washed with Nano Clean Wheel and Diamond Nano Shampoo. If the brakes experience extreme use and at high temperatures, fine powder from the brake lining may become stuck to the polish and cake to the surface of it if regular washing does not take place. You can tell that this has happened when it is very difficult to remove the dirt. However, the dirt is only stuck to the polish and it will not penetrate the structure of the wheel; this is also due to the high thermal resistance of the polish.
In this case, we recommend that the wheel be properly cleaned with Nano Clean Wheel.
Unique nanotechnological cosmetics that create an invisible transparent layer of nanoparticles (a millionth of a metre) on the car’s lacquer or glass have a width of only several nanometres. The nanoparticles contained in the cosmetics are invisible to the human eye because their size is several times smaller than the wavelength of visible light. We use this feature, for example, in transparent auto cosmetics which contain nanoparticles of silicone oxide or zircon oxide, which do not change the colour but give the surface the required hardness and resistance to scratching. They penetrate the pores and microscopic cracks in lacquer and so protect lacquer from further scratching. Other chemical components highlight the sheen and depth of lacquer.
The principle of PIKATEC DIAMOND nanocosmetics
The newest, the best and uncompromising – this is a new series of PIKATEC nanocosmetics. The assignment was clear – we want autocosmetics that can withstand cold arctic as well as hot equatorial extremes. We want maximum UV protection for lacquers! We want maximum hardness and abrasion resistance! We want maximum water resistance!
We want to seal pores in lacquer as much as possible for a period of one year. We want the shortest time possible for hardening and maximum resistance to industrial detergents. We want maximum thermal resistance. Simply put – we want to create the best and most resistant autocosmetics imaginable and, along the way, leave the production price to one side - this aspect will be addressed later, if necessary.
The PIKATEC DIAMOND series has been specially developed and produced from self-supporting emulsion and nanoparticles with a size of up to 30 nm (nm – a nanometre – one billionth of a metre), which are permanently dissolved in the liquid environment of the new generation cosmetic emulsion thanks to a special solvent. These solid particles contain silicon oxide, titanium oxide and zircon oxide. Together they improve the repelling properties in relation to liquids and resistance to mechanical surface wear and tear. Other unique components of PIKATEC DIAMOND autocosmetics provide a protective shield against other impurities, chemicals and salts. Moreover, the cosmetics provide the treated surface with a perfect UV filter and so prevent the aging of lacquer. The polish can withstand temperatures of over 700°C. This is the definition of the new PIKATEC DIAMOND autocosmetics.
Diamond Nano Shampoo – impurity remover, shampoo (150 ml)
A new formula of nano-preparation that highlights lacquer. In the first phase it is used to clean and remove impurities before Diamond Nano Armour (nano-polish for car bodywork) is applied. In the second phase it is used to maintain the surface of the bodywork after Diamond Nano Armour has been applied and to prolong the service life of this polish. After the polish has been applied try to avoid the use of industrial detergents on the car if possible. (They often destroy all protective polishes and surfaces, including wax.) However, the new formula has also significantly improved the resistance to these detergents. A treated surface of the bodywork exposed to washing (20 times) with a very strong detergent solution has lost only 7 % of its hydrophobic properties. (Test with detergent: 50 ml of detergent in 2 litres of water – each time washing an identical spot on the bodywork for one minute).
Nanoparticles (billionths of a metre) easily penetrate pores on the surface and remove stains caused by oil and insects. This preparation is optimised for manually washing car, ship and motorcycle bodywork. It is harmless to the environment.
Diamond Nano Armour –paintwork polish (50 ml)
The revolutionary new, uncompromising and ultimate formula of nanotechnological preparation that creates an invisible transparent layer of nanoparticles (billionths of a metre). A hard protective shield is created in this way. The polish penetrates pores and microscopic cracks in lacquer and protects it from further damage. It levels the surface and reduces its aerodynamic resistance. As a result flying objects easily rebound from the layer of nanoparticles and do not create scratches and grooves. The same applies to insects that come into contact with the bodywork. The effect of the preparation lasts for a long time – 12 months. It will provide a high sheen protection from scratches caused by small pebbles and dirt, protection from the influence of salt and bitumen, protection from pollen and resin from trees, protection from bird excrement and particularly from UV radiation. The polish should be applied exclusively on surfaces pre-washed with Diamond Nano Shampoo. The new formula is significantly resistant even to detergents. A surface exposed to washing (20 times) with a very strong detergent solution has lost only 7 % of its hydrophobic properties. (Test with detergent: 50 ml of detergent in 2 litres of water – each time washing an identical spot for one minute). Diamond Nano Armour is developed to withstand extreme temperatures of up to 700°C.
Diamond Nano Clear Glass – impurity remover for glass (40 ml)
A preparation used to remove impurities before Diamond Nano Protect Glass (nano protection of glass) is applied. Nanoparticles (billionths of a metre) easily enter the pores and remove the impurities settled in the structure of glass.
Diamond Nano Protect Glass – polish for glass (40 ml)
A revolutionary new, uncompromising and ultimate formula of nanotechnological hydrophobic preparation. It serves as protection against impurities and water. It has a long-term effect of up to one year. The nanoparticles (billionths of a metre) create an invisible transparent layer on the surface of glass, a hard protective shield of a kind, which penetrates the pores of glass, smooths the surface and reduces its aerodynamic resistance. As a result flying objects lightly rebound from the surface and do not create long scratches and grooves in the glass. Protection against insects that come into contact with the bodywork functions similarly. No (or hardly any) long smudges obstructing the driver’s view are created on the glass. The hydrophobic preparation works on the principle of a lotus effect whereby droplets of water glide down along the surface thanks to gravitational pull or air flow. These drops of liquid, rolling along the surface of the glass, remove particles of dirt that have stuck to the glass. When it rains, a self-cleaning effect takes place and it is not necessary to use windscreen wipers from speeds of about 60 km/h (according to the incline of the glass). However, you should always ensure that your driving is safe!
Diamond Nano Protect Wheel – polish for wheels (30 ml)
A new uncompromising nanotechnological preparation formula designed for the protection of aluminium, chrome-plated and lacquered wheels. It is very resistant to high temperatures. It covers the surface with an invisible (transparent) layer, which is very hard and protects the wheel from abrasive particles. It smooths the rough surface of the wheel, which means less dirt will stick, particularly dirt from brake pads. Because the impurities are not let onto the wheel’s surface, the wheel is not only protected – the dirt also cannot penetrate deep into the wheel’s structure. Removing this engrained dirt is very laborious and often almost impossible. This preparation can withstand temperatures of over 700° C. Its effect is long-lasting; the preparation provides a high sheen, protection from scratches caused by small pebbles and dust, protection from the effects of salts and bitumen, protection from pollen and resin from trees, protection from bird excrement and also protection form UV radiation. We recommend that the polish be applied exclusively to surfaces pre-washed with Nano Clean Wheel and Diamond Nano Shampoo. If the brakes experience extreme use and at high temperatures, fine powder from the brake lining may become stuck to the polish and cake to the surface of it if regular washing does not take place. You can tell that this has happened when it is very difficult to remove the dirt. However, the dirt is only stuck to the polish and it will not penetrate the structure of the wheel; this is also due to the high thermal resistance of the polish.
In this case, we recommend that the wheel be properly cleaned with Nano Clean Wheel.
ContactAnetu
